Peer-Reviewed Journals
129. A Novel Approach to Produce Metal–Metal Composites by Leveraging Immiscibility: Laser Powder Bed Fusion of Nanosilver-Dispersed Titanium
H. Shokri, S.-K. Rittinghaus, J. Schmelzer, J. Bertrand, B. Gökce
Advanced Engineering Materials 2401512, (2024)
128. FeNi nanoparticle-modified reduced graphene oxide as a durable electrocatalyst for oxygen evolution
I. Y. Khairani, B. Jin, S. M. Palardonio, U. Hagemann, B. Alonso, A. Ortega, C. Doñate-Buendía, J. Martorell, C. Ros, T. Kallio, B. Gökce
Journal of Catalysis 439, 115771, (2024)
127. In-melt electron analysis to accelerate process exploration of ceramics: Electron beam melting of TiB2
J. Xu, K. Wennersten, Z. Fu, F. Leijon, J. Moverare
Materialia 38, 102243, (2024)
126. Parallel Diffractive Multi-Beam Pulsed-Laser Ablation in Liquids Toward Cost-Effective Gram Per Hour Nanoparticle Productivity
I. Y. Khairani, M. Spellauge, F. Riahi, H. P. Huber, B. Gökce, C. Doñate-Buendía
Advanced Photonics Research 5(5), 2300290, (2024)
125. Synthesis of High Entropy Alloy Nanoparticles by Pulsed Laser Ablation in Liquids: Influence of Target Preparation on Stoichiometry and Productivity
S. Tahir, N. Shkodich, B. Eggert, J. Lill, O. Gatsa, M. Flimelová, E. Adabifiroozjaei, N. M. Bulgakova, L. Molina-Luna, H. Wende, M. Farle, A. V. Bulgakov, C. Doñate-Buendía, B. Gökce
ChemNanoMat 10(5), (2024)
124. Unveiling Fundamentals of Multi-Beam Pulsed Laser Ablation in Liquids toward Scaling up Nanoparticle Production
O. Gatsa, S. Tahir, M. Flimelová, F. Riahi, C. Doñate-Buendía, B. Gökce, A. V. Bulgakov
Nanomaterials 14(4), 365, (2024)
123. Laser fragmentation of a high-entropy oxide for enhanced photocatalytic carbon dioxide (CO2) conversion and hydrogen (H2) production
Z. P. Tehrani, T. Fromme, S. Reichenberger, B. Gökce, T. Ishihara, T. Lippert, K. Edalati
Advanced Powder Technology 35(5), 104448, (2024)
2023
122. Comparative insights into microstructure and magnetism of Ni-Mn-Sn Heusler alloys manufactured by electron beam and laser beam powder bed fusion
S.-K. Rittinghaus, H. Shokri, N. Shkodich, E. Bruder, M. Farle, B. Gökce
Additive Manufacturing Letters 7, 100159, (2023)
121. Towards enhancing ODS composites in laser powder bed fusion: Investigating the incorporation of laser-generated zirconia nanoparticles in a model iron–chromium alloy
M. Goßling, S.-K. Rittinghaus, S. Bharech, Y. Yang, M. B. Wilms, L. Becker, S. Weber, B.-X. Xu, B. Gökce
Journal of Material Research, (2023)
120. How Nanoparticle Size and Bubble Merging Is Governed by Short-Range Spatially Controlled Double-Beam Laser Ablation in Liquids
F. Riahi, C. Doñate-Buendía, S. Barcikowski, B. Gökce
Particle & Particle Systems Characterization, (2023)
119. 4D printing of magneto-responsive polymer structures by masked stereolithography for miniaturised actuators
J. L. Kricke, I. Y. Khairani, B. B. J. Beele, N. Shkodich, M. Farle, A. Slabon, C. Doñate-Buendía, B. Gökce
Virtual and Physical Prototyping 18(1), (2023)
118. Characterizing bubble interaction effects in synchronous-double-pulse laser ablation for enhanced nanoparticle synthesis
F. Riahi, A. Bußmann, C. Doñate-Buendía, S. Adami, N. A. Adams, S. Barcikowski, B. Gökce
Photonics Research 11(12), 2054, (2023)
117. Influence of Colloidal Additivation with Surfactant-Free Laser-Generated Metal Nanoparticles on the Microstructure of Suction-Cast Nd–Fe–B Alloy
J. Liu, Y. Yang, F. Staab, C. Doñate-Buendía, R. Streubel, B. Gökce, F. Maccari, P. Gabriel, B. Zingsem, D. Spoddig, K. Durst, M. Farle, O. Gutfleisch, S. Barcikowski, K. Skokov, A. R. Ziefuß
Advanced Engineering Materials 25(22), 2301054, (2023)
116. Additive manufacturing of oxide-dispersion strengthened alloys: Materials, synthesis and manufacturing
M. B. Wilms, S.-K. Rittingshaus, M. Goßling, B. Gökce
Progress in Materials Science 133, 101049, (2023)
115. Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production
I. Y. Khairani, G. Mínguez-Vega, C. Doñate-Buendía, B. Gökce
Physical Chemistry Chemical Physics 25, 19380, (2023)
114. Designing an Fe-Ni-Ti maraging steel tailor-made for laser additive manufacturing
P. Kürnsteiner, P. Barriobero-Vila, P. Bajaj, F. De Geuser, M. B. Wilms, E. A. Jägle, D. Raabe
Additive Manufacturing 73, 103647, (2023)
113. Development of Magnetocaloric Microstructures from Equiatomic Iron–Rhodium Nanoparticles through Laser Sintering
S. Tahir, J. Landers, S. Salamon, D. Koch, C. Doñate-Buendia, A. R. Ziefuß, H. Wende, B. Gökce
Advanced Engineering Materials, 2300245, (2023)
112. Understanding Inhomogeneous Mechanical Properties in PBF-LB/M Manufactured Parts Due to Inhomogeneous Macro Temperature Profiles Based on Process-Inherent Preheating
J. Zielinski, J. Theunissen, H. Kruse, S.-K. Rittinghaus, J. H. Schleifenbaum, D. Zhu, M. Megahed
Journal of Manufacturing and Materials Processing 7(3), 88, (2023)
111. Double-pulse laser ablation in liquids: nanoparticle bimodality reduction by sub-nanosecond interpulse delay optimization
C. Doñate-Buendia, M. Spellauge, R. Streubel, F. Riahi, S. Barcikowski, H. P. Huber, B. Gökce
Journal of Physics D: Applied Physics 56(10), 104001, (2023)
110. Investigation of cavitation bubble dynamics near a solid wall by high-resolution numerical simulation
A. Bußmann, F. Riahi, B. Gökce, S. Adami, S. Barcikowski, N. A. Adams
Physics of Fluids 35, 016115, (2023)
109. Solvent Influence on the Magnetization and Phase of Fe-Ni Alloy Nanoparticles Generated by Laser Ablation in Liquids
I. Y. Khairani, Q. Lin, J. Landers, S. Salamon, C. Doñate-Buendia, E. Karapetrova, H. Wende, G. Zangari, B. Gökce
Nanomaterials 13(2), 227, (2023)
2022
108. New Frontiers in Materials Design for Laser Additive Manufacturing
S.-K. Rittinghaus, E. A. Jägle, M. Schmid, B. Gökce
Materials 15(17), 6172, (2022)
107. An Opposite Tendency of Mechanical Properties and Corrosion Resistance of a High-Strength Al-5024 Alloy Processed by Laser Powder Bed Fusion
H. Zhang, D. Dai, L. Xi, B. Gökce, D. Gu
Journal of Manufacturing Science and Engineering 145(3), 031001, (2022)
106. Laser Additive Manufacturing of Oxide Dispersion-Strengthened Copper–Chromium–Niobium Alloys
M. B. Wilms, S.-K. Rittinghaus
Journal of Manufacturing and Materials Processing 6(5), 102, (2022)
105. Laser Fusion of Powder and Foil – a Multi Material Approach to Additive Manufacturing
S.-K. Rittinghaus, F. Throm, M. B. Wilms, R. Hama-Saleh, M. W. Rackel
Lasers in Manufacturing and Materials Processing, (2022)
104. Production of bactericidal powder suitable for Laser Powder Bed Fusion by silver nanoadditivation of polyamide
C. Doñate-Buendia, A. Ingendoh-Tsakmakidis, T. Hupfeld, A. Winkel, S. Barcikowski, B. Gökce
Procedia Cirp 11, 47, (2022)
103. Additive Manufacturing Potntials of High Performance Ferritic (HiperFer) Steels
T. Fischer, B. Kuhn, X. Fan, M. B. Wilms
Applied Sciences 12(14), 7234, (2022)
102. Manufacturing Oxide Dispersion Strengthened Steels using the Advanced Directed Energy Deposition process of High-Speed Laser Cladding
M. B. Wilms, N. Pirch, B. Gökce
Progress in Additive Manufacturing, (2022)
101. Powder preparation during ball milling and laser additive manufacturing of aluminum matrix nanocomposites: Powder properties, processability and mechanical property
R. Wang, L. Xi, K. Ding, B. Gökce, S. Barcikowski, D. Gu
Advanced Powder Technology 33, 103687, (2022)
100. Comparison of ultrashort pulse ablation of gold in air and water by time-resolved experiments
M. Spellauge, C. Doñate-Buendía, S. Barcikowski, B. Gökce, H. P. Huber
Light: Science & Applications 11, (2022)
99. Intrinsic Heat Treatment of an Additively Manufactured Medium Entropy AlCrFe2Ni2-Alloy
S.-K. Rittinghaus, A. Ali, U. Hecht
Metals and Materials International (2022)
98. Ultrafast cold-brewing of coffee by picosecond-pulsed laser extraction
A. R. Ziefuß, T. Hupfeld, S. W. Meckelmann, M. Meyer, O. J. Schmitz, W. Kaziur-Cegla, L. K. Tintrop, T. C. Schmidt, B. Gökce, S. Barcikowski
npj Science of Food 6, (2022)
97. Inactivation of SARS-CoV-2 by a chitosan/α-Ag2WO4 composite generated by femtosecond laser irradiation
P. F. Santos Pereira, A. C. Alves de Paula e Silva, B. N. Alves da Silva Pimentel, I. M. Pinatti, A. Z. Simões, C. E. Vergani, D. F. Barreto-Vieira, M. A. Nunes da Silva, M. D. Miranda, M. E. S. Monteiro, A. Tucci, C. Doñate-Buendía, G. Mínguez-Vega, J. Andrés, E. Longo
Scientific Reports 12, (2022)
96. Laser Ablation of NiFe2O4 and CoFe2O4 Nanoparticles
E. Sachse, M. Escobar-Castillo, F. Waag, B. Gökce, S. Salamon, J. Landers, H. Wende, D. C. Lupascu
Nanomaterials 12(11), 1872, (2022)
95. Identification of the main mixing process in the synthesis of alloy nanoparticles by laser ablation of compacted micropowder mixtures
F. Waag, W. Fares, Y. Li, C. Andronescu, B.Gökce, S. Barcikowski
Journal of Materials Science 57, 3041, (2022)
94. Time resolved studies reveal the origin of the unparalleled high efficiency of one nanosecond laser ablation in liquids
S. Dittrich, M. Spellauge, S. Barcikowski, H. P. Huber, B. Gökce
Opto-Electronic Advances 5(6), 210053, (2022)
2021
93. Microstructure formation and mechanical properties of ODS steels built by Laser Additive Manufacturing of nanoparticle coated iron-chromium powders
C. Doñate-Buendia, P. Kürnsteiner, F. Stern, M. B. Wilms, R. Streubel, I. M. Kusoglu, J. Tenkamp, E. Bruder, N. Pirch, S.Barcikowski, K. Durst, J. H. Schleifenbaum, F. Walther, B. Gault, B. Gökce
Acta Materialia 206, 116566, (2021)
92. Formation of Fe-Ni Nanoparticle Strands in Macroscopic Polymer Composites: Experiment and Simulation
R. Nadarajah, L. Tasdemir, C. Thiel, S. Salamon, A. S. Semisalova, H. Wende, M. Farle, S. Barcikowski, D. Erni, B. Gökce
Nanomaterials 11, 2095, (2021)
91. Quality over Quantity: How Different Dispersion Qualities of Minute Amounts of Nano-Additives Affect Material Properties in Powder Bed Fusion of Polyamide 12
A. Sommereyns, S. Gann, J. Schmidt, A. Baqerzadeh Chehreh, A. Lüddecke, F. Walther, B. Gökce, S. Barcikowski, M. Schmidt
Materials 14, 5322, (2021)
90. Towards Synthetic L10-FeNi: Detecting the Absence of Cubic Symmetry in Laser-Ablated Fe-Ni Nanoparticles
Q. Lin, R. Nadarajah, E. Hoglund, A. Semisalova, J. M. Howe, B. Gökce, G. Zangari
Applied Surface Science 567, 150664, (2021)
89. Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels
Y. Yang, C. Doñate-Buendía, T. David Oyedeji, B. Gökce, B.-X. Xu
Materials 14, 3463, (2021)
88. On the selection and design of powder materials for laser additive manufacturing
C. Doñate-Buendia, D. Gu, M. Schmidt, S. Barcikowski, A. M. Korsunsky, B. Gökce
Materials & Design 204, 109653, (2021)
87. Nanoparticle Additivation Effects on Laser Powder Bed Fusion of Metals and Polymers—A Theoretical Concept for an Inter-Laboratory Study Design All Along the Process Chain, Including Research Data Management
I. M. Kusoglu, F. Huber, C. Donate-Buendia, A. R. Zielfuss, B. Gökce, J. T. Sehrt, A. Kwade, M. Schmidt, S. Barcikowski
Materials 14, 4892, (2021)
86. Towards laser printing of magnetocaloric structures by inducing a magnetic phase transition in iron‑rhodium nanoparticles
R. Nadarajah, J. Landers, S. Salamon, D. Koch, S. Tahir, C. Doñate-Buendía, B. Zingsem, R. E. Dunin-Borkowski, W. Donner, M. Farle, H. Wende, B. Gökce
Scientific Reports 11, 13719, (2021)
85. Laser Powder Bed Fusion of Polymers: Quantitative Research Direction Indices
I. M. Kusoglu, C. Doñate-Buendia, S. Barcikowski, B. Gökce
Materials 14, 1169, (2021)
84. Influence of sub-monolayer quantities of carbon nanoparticles on the melting and crystallization behavior of polyamide 12 powders for additive manufacturing
A. Sommereyns, T. Hupfeld, S. Gann, C. Wu, E. Zhuravlev, S. Baumann, J. Rudloff, M. Lang, B. Gökce, S. Barcikowski, M. Schmidt
Materials & Design 201, 109487, (2021)
83. Plasma and nanoparticle shielding during pulsed laser ablation in liquids cause ablation efficiency decrease
S. Dittrich, S. Barcikowski, B. Gökce
Opto-Electronic Advances 4, 200072, (2021)
82. Discrimination of ablation, shielding, and interface layer effects on the steady-state formation of persistent bubbles under liquid flow conditions during laser synthesis of colloids
M.-R. Kalus, R. Lanyumba, S. Barcikowski, B. Gökce
Journal of Flow Chemistry 11, 773, (2021)
81. Synthesis of gold, platinum, and gold-platinum alloy nanoparticle colloids with high-power megahertz-repetition-rate lasers: The importance of the beam guidance method
F. Waag, R. Streubel, B. Gökce, S. Barcikowski
Applied Nanoscience 11, 1303, (2021)
80. How the physicochemical properties of the bulk material affect the ablation crater profile, mass balance and bubble dynamics during single-pulse, nanosecond laser ablation in water
M.-R. Kalus, S. Barcikowski, B. Gökce
Chemistry - A European Journal 27, 5978, (2021)
79. Design of Low Pt Electrocatalyst through Immobilization on Metal@C Support for Efficient Hydrogen Evolution Reaction in Acidic Media
F. Davodi, G. Cilpa-Karhu, J. Sainio, H. Jinag, E. Mühlhausen, G. Marzun, B. Gökce, K. Laasonen, T. Kallio
Journal of Electroanalytical Chemistry 896, 115076, (2021)
78. Comparing Activity of Complex Solid Solution Electrocatalysts Using Inflection Points of Voltammetric Activity Curves as Activity Descriptors
T. Löffler, F. Waag, B. Gökce, L. Alfred, S. Barcikowski, W. Schuhmann
ACS Catalysis 11, 1014, (2021)
2020
77. Plasmonic seasoning: Giving color to desktop laser 3D-printed polymers by highly dispersed nanoparticles
T. Hupfeld, A. Wegner, M. Blanke, C. Doñate-Buendía, V. Sharov, S. Nieskens, M. Piechotta, M. Giese, S. Barcikowski, B. Gökce
Advanced Optical Materials 8, 2000473, (2020)
76. 3D Printing of magnetic parts by Laser Powder Bed Fusion of iron oxide nanoparticle functionalized polyamide powders
T. Hupfeld, S. Salamon, J. Landers, A. Sommereyns, C. Doñate-Buendía, J. Schmidt, H. Wende, M. Schmidt, S. Barcikowski, B. Gökce
Journal of Materials Chemistry C 8, 12204, (2020)
75. Controlling the Oxidation of Magnetic and Electrically Conductive Solid-Solution Iron-Rhodium Nanoparticles Synthesized by Laser Ablation in Liquids
R. Nadarajah, S. Tahir, J. Landers, D. Koch, A. S. Semisalova, J. Wiemeler, A. El-Zoka, S.-H. Kim, D. Utzat, R. Möller, B. Gault, H. Wende, M. Farle, B. Gökce
Nanomaterials 10, 2362, (2020)
74. Research trends in Laser Powder Bed Fusion of Al alloys within the last decade
I. M. Kusoglu, B. Gökce, S. Barcikowski
Additive Manufacturing 36, 101489 (2020)
73. Nanoparticles engineering by pulsed laser ablation in liquids:concepts and applications
E. Fazio, B. Gökce, A. De Giacomo, M. Meneghetti, G. Compagnini, M.Tommasini, F. Waag, A. Lucotti, C. G. Zanchi, P. M. Ossi, M. Dell'Aglio, L. D'Urso, M. Condorelli, V. Scardaci, F. Biscaglia, L. Litti, M. Gobbo, G. Gallo, M. Santoro, S. Trusso, F. Neri
Nanomaterials 10, 2317, (2020)
72. Effect of nanoparticle additivation on the microstructure and microhardness of oxide dispersion strengthened steels produced by laser powder bed fusion and directed energy deposition
C. Doñate-Buendia, R. Streubel, P. Kürnsteiner, M.B. Wilms, F. Stern, J. Tenkamp, E. Bruder, S. Barcikowski, B. Gault, K. Durst, J. H. Schleifenbaum, F. Walther, B. Gökce
Procedia CIRP 94, 41, (2020)
71. Composition and structure of magnetic high-temperature-phase, stable Fe-Au core-shell nanoparticles with zero-valent bcc Fe core
M. Kamp, A. Tymoczko, R. Popescu, U. Schürmann, R. Nadarajah, B. Gökce, C. Rehbock, D. Gerthsen, S. Barcikowski, L. Kienle
Nanoscale Advances 2, 3912, (2020)
70. Use of (Nano-)Additives in Laser Powder Bed Fusion of Al powder feedstocks: Research directions within the last decade
I. M. Kusoglu, B. Gökce, S. Barcikowski
Procedia CIRP 94, 11, (2020)
69. Increasing the Size-Selectivity in Laser-Based g/h Liquid Flow Synthesis of Pt and PtPd Nanoparticles for CO and NO Oxidation in Industrial Automotive Exhaust Gas Treatment Benchmarking
S. Dittrich, S. Kohsakowski, B. Wittek, C. Hengst, B. Gökce, S. Barcikowski, S. Reichenberger
Nanomaterials 10, 1582, (2020)
68. Analysis of the nanoparticle dispersion and its effect on thecrystalline microstructure in carbon-additivated PA12 feedstock material forlaser powder bed fusion
T. Hupfeld, A. Sommereyns, F. Riahi, C. Doñate-Buendía, S. Gann, M. Schmidt, B. Gökce, S. Barcikowski
Materials 13, 3312, (2020)
67. In situ speciation and spatial mapping of Zn products during pulsed laser ablation in liquids by combined synchrotron method
S. Reich, J. Göttlicher, A. Ziefuss, R. Streubel, A. Letzel, A. Menzel, O. Mathon, S. Pascarelli, T. Baumbach, M. Zuber, B. Gökce, S. Barcikowski, A. Plech
Nanoscale 12, 14011, (2020)
66. Scaling up colloidal surface additivation of polymer powders for laser powder bed fusion
T. Hupfeld, C. Doñate-Buendía, M. Krause, A. Sommereyns, A. Wegner, T. Sinnemann, M. Schmidt, B. Gökce, S. Barcikowski
Procedia CIRP 94, 119, (2020)
65. How colloidal surface additivation of polyamide 12 powders with well-dispersed silver nanoparticles influences the crystallization already at low 0.01 vol%
T. Hupfeld, A. Blasczyk, T. Schuffenhauer, E. Zhuravlev, M. Krebs, S. Gann, O. Keßler, M. Schmidt, B. Gökce, S. Barcikowski
Additive Manufacturing 36, 101419, (2020)
64. Second harmonic generation as a probe of broken mirror symmetry
B. T. Fichera, A. Kogar, L. Ye, B. Gökce, A. Zong, J. G. Checkelsky, N. Gedik
Phys. Rev. B 101, 241106(R), (2020)
63. Picosecond laser-induced surface structures on alloys in liquids and their influence on nanoparticle productivity during laser ablation
R. Nadarajah, S. Barcikowski, B. Gökce
Optics Express 28, 2909 (2020)
62. Evaluation of essential powder properties through complementary particle size analysis methods for laser powder bed fusion of polymers
A. Sommereyns, T. Hupfeld, B. Gökce, S. Barcikowski, M. Schmidt
Procedia CIRP 94, 116, (2020)
61. Manipulation of the size and phase composition of yttrium iron garnet nanoparticles by pulsed laser post-processing in liquid
T. Hupfeld, F. Stein, S. Barcikowski, B. Gökce, U. Wiedwald
Molecules 25, 1869 (2020)
60. Recent Progress in Laser Materials Processing and Synthesis
B. Gökce, M. Filipescu, S. Barcikowski
Applied Surface Science 513, 145762 (2020)
59. Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles
S. Siebeneicher, F. Waag, M. E. Castillo, V. V. Shvartsman, D. C. Lupascu, B. Gökce
Nanomaterials 10, 359 (2020)
58. Dynamics of laser-induced cavitation bubbles at a solid-liquid interface in high viscosity and high capillary number regimes
T. Hupfeld, G. Laurens, S. Merabia, S. Barcikowski, B. Gökce, D. Amans
Journal of Applied Physics 127, 044306 (2020)
57. The Effect of Downstream Laser Fragmentation on the Specific Surface Area and Photoelectrochemical Performance of Barium Tantalum Oxynitride
F. Haydous, F. Waag, W. Si, F. Li , S. Barcikowski, B. Gökce, T. Lippert
Applied Surface Science 510, 145429 (2020)
2019
56. Determining the role of redox-active materials during laser-induced water decomposition
M.-R. Kalus, R. Lanyumba, N. Parodi, M. A. Jochmann, K. Kerpen, U. Hagemann, T. C. Schmidt, S. Barcikowski, B. Gökce
Physical Chemistry Chemical Physics 21, 18636 (2019)
55. Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles
F. Waag, Y. Li, A. Ziefuß, E. Bertin, M. Kamp, V. Duppel, G. Marzun, L. Kienle, S. Barcikowski, B. Gökce
RSC Advances 9, 18547 (2019)
54. Comparison of the productivity and ablation efficiency of different laser classes for laser ablation of gold in water and air
S. Dittrich, R. Streubel, C. McDonnell, H. P. Huber, S. Barcikowski, B. Gökce
Applied Physics A 125, 432 (2019)
53. Tribological Properties of Laser-Generated Hard Ceramic Particles in a Gear Drive Contact
S. Jendrzej, L. Gondecki, J. Debus, H. Moldenhauer, P. Tenberge, S. Barcikowski, B. Gökce
Applied Surface Science 467, 811 (2019)
52. Early appearance of crystalline nanoparticles in pulsed laser ablation in liquids dynamics
S. Reich, A. Letzel, A. Menzel, N. Kretzschmar, B. Gökce, S. Barcikowski, A. Plech
Nanoscale 11, 6962 (2019)
51. Incubation effect of pre-irradiation on bubble formation and ablation in laser ablation in liquids
S. Reich, A. Letzel, B. Gökce, A. Menzel, S. Barcikowski, A. Plech
ChemPhysChem 20, 1036 (2019)
50. How the re-irradiation of a single ablation spot affects cavitation bubble dynamics and nanoparticles properties in laser ablation in liquids
A. Letzel, M. Santoro, J. Frohleiks, A. R. Ziefuß, S. Reich, A. Plech, E. Fazio, F. Neri, S. Barcikowski, B. Gökce
Applied Surface Science 473, 828, (2019)
49. Time and mechanism of nanoparticle functionalization by macromolecular ligands during pulsed laser ablation in liquids
A. Letzel, S. Reich, T. dos Santos Rolo, A. Kanitz, J. Hoppius, A. Rack, M. Olbinado, A. Ostendorf, B. Gökce, A. Plech, S.Barcikowski
Langmuir 35, 3038, (2019)
48. Discrimination of effects leading to gas formation during pulsed laser ablation in liquids
M.-R. Kalus, V. Reimer, S. Barcikowski, B. Gökce
Applied Surface Science 465, 1096, (2019)
47. Oxynitride Thin Films versus Particle-Based Photoanodes: a Comparative Study for Photoelectrochemical Solar Water Splitting
F. Haydous, M. Döbeli, W. Si, F. Waag, F. Li, E. Pomjakushina, A. Wokaun, B. Gökce, D. Pergolesi, T. Lippert
ACS Applied Energy Materials 2, 754, (2019)
46. Ablation target cooling by maximizing the nanoparticle productivity in laser synthesis of colloids
F. Waag, B. Gökce, S. Barcikowski
Applied Surface Science 466, 647, (2019)
2018
45. Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
C. Doñate-Buendía, F. Frömel, M. B. Wilms, R. Streubel, J. Tenkamp, T. Hupfeld, M. Nachev, E. Gökce, A. Weisheit, S. Barcikowski, F. Walther, J. H. Schleifenbaum, B. Gökce
Materials & Design 154, 360 (2018)
44. Catalyst Support Effect on the Activity and Durability of Magnetic Nanoparticles as an Advanced Electrocatalyst for Full Water Splitting
F. Davodi, E. Mühlhausen, M. Tavakkoli, J. Sainio, H. Jiang, B. Gökce, G. Marzun, T. Kallio
ACS Applied Materials & Interfaces 10, 31300, (2018)
43. A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering
T. Hupfeld, T. Laumer, T. Stichel, T. Schuffenhauer, J. Heberle, M. Schmidt, S. Barcikowski, B. Gökce
Procedia CIRP 74C, 244 (2018)
42. Two mechanisms of nanoparticle generation in picosecond laser ablation in liquids: The origin of the bimodal size distribution
C.-Y. Shih, R. Streubel, J. Heberle, A. Letzel, M. V. Shugaev, C. Wu, M. Schmidt, B. Gökce, S. Barcikowski, L. V. Zhigilei
Nanoscale 10, 6900 (2018)
41. Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
M. B. Wilms, R. Streubel, F. Frömel, A. Weisheit, J. Tenkamp, F. Walther, S. Barcikowski, J. H. Schleifenbaum, B. Gökce
Procedia CIRP 74C, 196 (2018)
40. X-Ray spectroscopic and stroboscopic analysis of pulsed-laser ablation of Zn and its oxidation
S. Reich, J. Göttlicher, A. Letzel, B. Gökce, S. Barcikowski, T. Santos Rolo, T. Baumbach, A. Plech
Applied Physics A 124,71 (2018)
39. Neue Nanokomposite für die additive Fertigung
B. Gökce, S. Barcikowski
Chemie Ingenieur Technik 90, 1193 (2018)
38. Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
R. Streubel, M. B. Wilms, C. Doñate-Buendía, A. Weisheit, S. Barcikowski, J. H. Schleifenbaum, B. Gökce
Jpn. Journal of Applied Physics 57, 040310 (2018)
37. Primary particle diameter differentiation and bimodality identification by five analytical methods using gold nanoparticle size distributions synthesized by pulsed laser ablation in liquids
A. Letzel, B. Gökce, A. Menzel, A. Plech, S. Barcikowski
Applied Surface Science 435, 743 (2018)
2017
36. How persistent microbubbles shield nanoparticle productivity in laser synthesis of colloids - quantification of their volume, dwell dynamics, and gas composition
M.-R. Kalus, N. Bärsch, R. Streubel, E. Gökce, S. Barcikowski, B. Gökce
Physical Chemistry Chemical Physics 19, 7112 (2017)
35. Laser Micromachining of Metals with Ultra-Short Pulses: Factors Limiting the Scale-Up Process
B. Jaeggi, S. Remund, R. Streubel, B. Gökce, S. Barcikowski, B. Neuenschwander
Journal of Laser Micro/Nanoengineering 12, 267 (2017)
34. Adjusting the catalytic properties of cobalt ferrite nanoparticles by pulsed laser fragmentation in water with defined energy dose
F. Waag, B. Gökce, C. Kalapu, G. Bendt, S. Salamon, J. Landers, U. Hagemann, M. Heidelmann, S. Schulz, H. Wende, N. Hartmann, M. Behrens, S. Barcikowski
Scientific Reports 7, 13161 (2017)
33. Opportunities and Challenges for Laser Synthesis of Colloids
B. Gökce, V. Amendola, S. Barcikowski
ChemPhysChem 18, 983 (2017)
32. Germanium Sub-Microspheres Synthesized by Picosecond Pulsed Laser Melting in Liquids: Educt Size Effects
D. Zhang, M. Lau , S. Lu , S. Barcikowski, B. Gökce
Scientific Reports 7, 40355 (2017)
31. Colloidal stability of metal nanoparticles in engine oil under thermal and mechanical load
S. Jendrzej, B. Gökce, S. Barcikowski
Chemical Engineering & Technology 40, 1569 (2017)
30. Size Quenching during Laser Synthesis of Colloids Happens Already in the Vapor Phase of the Cavitation Bubble
A. Letzel, B. Gökce, P. Wagener, S. Ibrahimkutty, A. Menzel, A. Plech, S. Barcikowski
The Journal of Physical Chemistry C 121, 5356 (2017)
29. Upconversion nanoparticles synthesized by ultra-short pulsed laser ablation in liquid: effect of stabilizing environment
L. Gemini, T. Schmitz, R. Kling, S. Barcikowski, B. Gökce
ChemPhysChem 18, 1210 (2017)
28. Process Chain for the Fabrication of Nanoparticle Polymer Composites by Laser Ablation Synthesis
E. Maurer, S. Barcikowski, B. Gökce
Chemical Engineering & Technology 40, 1535 (2017)
27. Laser Synthesis and Processing of Colloids – Fundamentals and Applications
D. Zhang, B. Gökce, S. Barcikowski
Chemical Reviews 117, 3990 (2017)
26. Laser-induced Growth of YVO4:Eu3+ Nanoparticles from Sequential Flowing Aqueous Suspension
H. Wang, M. Lau, T. Sannomiya, B. Gökce, S. Barcikowski, O. Odawara, H. Wada
RSC Advances 7, 9002 (2017)
25. High productive and continuous nanoparticle fabrication by laser ablation of a wire-target in a liquid jet
S. Kohsakowski, A. Santagata, M. Dell’Aglio, A. de Giacomo, S. Barcikowski, P. Wagener, B. Gökce
Applied Surface Science 403, 487 (2017)
24. Ultrasmall Yttrium Iron Garnet Nanoparticles with High Coercivity at Low Temperature Synthesized by Laser Ablation and Fragmentation of Pressed Powders
T. Schmitz, U. Wiedwald, C. Dubs, B. Gökce
ChemPhysChem 18, 1125 (2017)
23. Perspective of Laser-Prototyping Nanoparticle-Polymer Composites
D. Zhang, B. Gökce
Applied Surface Science 392, 991 (2017)
22. Fluence threshold behavior on ablation and bubble formation in pulsed laser ablation in liquids
S. Reich, P. Schönfeld, A. Letzel, S. Kohsakowski, M. Olbinado, B. Gökce, S. Barcikowski, A. Plech
ChemPhysChem 18, 1084 (2017)
21. Formation Mechanism of Laser-Synthesized Iron-Manganese Alloy Nanoparticles, Manganese Oxide Nanosheets and Nanofibers
D. Zhang, Z. Ma, M. Spasova, A. E. Yelsukova, S. Lu, M. Farle, U. Wiedwald, B. Gökce
Particle & Particle Systems Characterization 34, 1600225 (2017)
20. How Size Determines the Value of Gold - Economic Aspects of Wet Chemical and Laser-Based Metal Colloid Synthesis
S. Jendrzej, B. Gökce, M. Epple. S. Barcikowski
ChemPhysChem 18, 1012 (2017)
19. Pulsed laser ablation in liquids: Interaction of the bubble with particle formation
S. Reich, P. Schönfeld, P. Wagener, A. Letzel, S. Ibrahimkutty, B. Gökce, S. Barcikowski, A. Menzel, T. dos Santos Rolo, A. Plech
Journal of Colloid & Interface Science 489, 106 (2017)
2016
18. Pilot-Scale Synthesis of Metal Nanoparticles by High-Speed Pulsed Laser Ablation in Liquids
R. Streubel, G. Bendt, B. Gökce
Nanotechnology 27, 205602 (2016)
17. Integration of Gold Nanoparticles into NIR-Radiation Curable Powder Resin
C. Schmitz, B. Gökce, J. Jakobi, S. Barcikowski, B. Strehmel
Chemistry Select 1, 5574 (2016)
16. Target geometry and rigidity determines laser-induced cavitation bubble transport and nanoparticle productivity – A high-speed videography study
S. Kohsakowski, B. Gökce, R. Tanabe, P. Wagener, A. Plech, Y. Ito, S. Barcikowski
Physical Chemistry Chemical Physics 18, 16585 (2016)
15. Effect of various dispersing agents on the stability of silver microparticle dispersion and the formulation of uniform silver film by laser melting
A. Letzel, E. Maurer, M. Meixner, R. Poprawe, J. Stollenwerk, S. Hessner, K. Lehmann, B. Gökce, S. Barcikowski
Journal of Laser Applications 28, 042004 (2016)
14. Continuous Multigram Nanoparticle Synthesis by High-Power, High-Repetition-Rate Ultrafast Laser Ablation in Liquids
R. Streubel, S. Barcikowski, B. Gökce
Optics Letters 41, 1486 (2016)
13. Debris-Free Rear-Side Picosecond Laser Ablation of Thin Germanium Wafers in Water with Ethanol
D. Zhang, B. Gökce, S. Sommer, R. Streubel, S. Barcikowski
Applied Surface Science 367, 222 (2016)
12. Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers
L. Jonusauskas, M. Lau, P. Gruber, B. Gökce, S. Barcikowski, M. Malinauskas, A. Ovsianikov
Nanotechnology 27, 154001 (2016)
11. Barrierless growth of precursor-free, ultrafast laser-fragmented noble metal nanoparticles by colloidal atom clusters - A kinetic in situ study
S. Jendrzej, B. Gökce, V. Amendola, S. Barcikowski
Journal of Colloid & Interface Science 463, 299 (2016)
2015
10. Solid solution magnetic FeNi nanostrand–polymer composites by connecting-coarsening assembly
S. Barcikowski, T. Baranowski, Y. Durmus, U. Wiedwald, B. Gökce
Journal of Materials Chemistry C 3, 10699 (2015)
9. Layered Seed-Growth of AgGe Football-like Microspheres via Precursor-Free Picosecond Laser Synthesis in Water
D. Zhang, B. Gökce, C. Notthoff, S. Barcikowski
Scientific Reports 5, 13661 (2015)
8. Ripening kinetics of laser-generated plasmonic nanoparticles in different solvents
B. Gökce, D. D van't Zand, A. Menéndez-Manjón, S. Barcikowski
Chemical Physics Letters 626, 96 (2015)
2014 and before
7. Femtosecond pulse shaping using the geometric phase
B. Gökce, Y. Li, M. J. Escuti, K. Gundogdu
Optics Letters 39, 1521 (2014)
6. Effect of p-type doping on the oxidation of H–Si(111) studied by second-harmonic generation
B. Gökce, D. B. Dougherty, K. Gundogdu
Journal of Vacuum Science & Technology A 30, 040603 (2012)
5. Control of the Oxidation Kinetics of H-terminated (111)Si by Using the Carrier Concentration and the Strain: a Second-harmonic-generation Investigation
B. Gökce, K. Gundogdu, D. E. Aspnes
Journal of the Korean Physical Society 60, 1685 (2012)
4. Effect of strain on bond-specific reaction kinetics during the oxidation of Hydrogen terminated (111) Si
B. Gökce, D. E. Aspnes, K. Gundogdu
Applied Physics Letters 98, 121912 (2011)
3. Bond-specific reaction kinetics during the oxidation of (111) Si: Effect of n-type doping
B. Gökce, D. E. Aspnes, G. Lucovsky, K. Gundogdu
Applied Physics Letters 98, 021904 (2011)
2. Back-reflection second-harmonic generation of (111) Si using focused, Gaussian beams: theory and experiment
B. Gökce, K. Gundogdu, E. J. Adles, D. E. Aspnes
Journal of the Korean Physical Society 58, 1237 (2011)
1. Measurement and control of in-plane surface chemistry during the oxidation of H-terminated (111) Si
B. Gökce, E. J. Adles, D. E. Aspnes, K. Gundogdu
PNAS 107, 17503 (2010)
Books
3. Handbook of Laser Synthesis and Processing of Colloids (Second Edition)
S. Barcikowski, V. Amendola, M. Lau, G. Marzun, C. Rehbock, S. Reichenberger, D. Zhang, B. Gökce
DuEPublico (2019) doi.org/10.17185/duepublico/70584
2. I love to share knowledge - A personal perspective on academic teaching
J. Albrecht, C. Brenner, B. Gökce, P. Malkemper, J. Niemeyer, T. Zeume
University Library of University of Duisburg-Essen, ISBN: 978-3-940402-09-7, (2017)
1. Handbook of Laser Synthesis of Colloids
S. Barcikowski, V. Amendola, G. Marzun, C. Rehbock, S. Reichenberger, D. Zhang, B. Gökce
DuEPublico (2016) doi.org/10.17185/duepublico/41087
Invited Talks
2022
30. Laser synthesis of nanocomposites for 3D printing
CIMTEC 2022 - 15th International Ceramics Congress & 9th Forum on New Materials
Montecatini Terme, Italy, June 25-29
2021
29. Laser synthesis of nanocomposites for additive manufacturing
Materials and Lasers Workshop, German-Russian Interdisciplinary Science Center
Online Seminar
28. Nanoparticle decorated polymer powders for laser powder bed fusion
International Conference on Ultrafast Optical Science (UltrafastLight-2021)
Moscow, Russia, October 4th - 8th, 2021
27. Laser synthesis of nanocomposites for additive manufacturing
10th International Workshop on Functional Nanocomposites
Varese, Italy, September 7th - 10th, 2021
26. Laser Additive Manufacturing of Nanocomposite Powders: Effect of Nanoparticle Additivation on the Microstructure of ODS Steels
International High-end Forum of Composites Technology and Equipment Development
Nanjing, China, June 23th - 25th, 2021
2020
25. Laser Additive Manufacturing of Nanocomposite Powders
Materials Science & Technology 2020: Additive Manufacturing: Alloy Design to Develop New Feedstock Materials
Pittsburgh, PA, USA, October 4th - 8th, 2020
24. Laser synthesis of nanoparticles for laser powder bed fusion
International Workshop on Frontiers in Lasers and Applications (FLA 2020)
Nassau, The Bahamas, May 26th - 29th , 2020
2019
23. Laser Ablation Synthesis of Nanoparticles for Laser Additive Manufacturing
COLA 2019 - 15th International Conference on Laser Ablation
Maui, Hawaii, USA, September 8th - 13th, 2019
22. Laser Synthesis of Nanocomposite Powders for Laser Additive Manufacturing
Materials Science and Engineering, University of Virginia
Charlottesville, VA, USA, April 10th, 2019
21. Laser additive manufacturing of oxide dispersion strengthened steels
SPIE Photonics West, Laser 3D Manufacturing VI
San Francisco, CA, USA, February 2nd - 7th, 2019
20. Laser ablation in liquids: Fundamentals and applications
SPIE Photonics West, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV
San Francisco, CA, USA, February 2nd - 7th, 2019
2018
19. Nanocomposites for Additive Manufacturing
5th Ruhr-Symposium - Functional Materials for Additive Manufacturing
Duisburg, Germany, October 10th, 2018
18. Synthesis of magnetic nanoalloys by pulsed laser ablation in liquids
XXVII International Materials Research Congress 2018
Cancun, Mexico, August 19th - 24th, 2018
17. High throughput synthesis of laser-generated nanoparticles: principles and practices
Seminar: Nanoparticles engineering by pulsed laser ablation: concepts and applications
Messina, Italy, July 16th, 2018
16. Laser Ablation Synthesis of Colloids: Fundamentals and Applications
6th International School on Lasers in Materials Science
Venice, Italy, July 8th – 14th, 2018
15. High-throughput nanoparticle generation by ultra-short pulsed laser ablation in liquids
19th International Symposium on Laser Precision Microfabrication (LPM 2018)
Edinburgh, Scotland, UK, June 25th - 28th, 2018
14. Nanopartikel-modifizierte Polymerpulver für die Laser-basierte additive Fertigung
DGM Fachtagung - Werkstoffe und Additive Fertigung
Potsdam, Germany, April 25th - 26th, 2018
13. Nanocomposites for laser additive manufacturing
Seminar Applied Laser Technologies, Ruhr-Universität Bochum
Bochum, Germany, March 26th, 2018
12. Laser synthesis for laser processing: materials for additive manufacturing
ZFM Festkörpertag 2018
Hanover, Germany, Feburary 2nd, 2018
11. Nanomaterials in Focus - Synthesis by Lasers
Physical Chemistry Colloquium, University of Münster
Münster, Germany, January 23th, 2018
2017
10. Laser Synthesis and Processing of Nanomaterials
Center for Materials Science and Engineering, Massachusetts Institute of Technology
Cambridge, MA, USA, September 9th, 2017
9. Process-stable, highly pure nanomaterials by pilot-scale, continuous high-power laser production
SPIE Photonics West, Synthesis and Photonics of Nanoscale Materials XIV
San Francisco, CA, USA, January 28th - February 2nd, 2017
8. Pilot-Scale Synthesis of catalysis-relevant nanoparticles by high-power ultrafast laser ablation in liquids
SPIE Photonics West, Laser-based Micro- and Nanoprocessing XI
San Francisco, CA, USA, January 28th - February 2nd, 2017
2016
7. Fundamentals and Applications of Laser Ablation in Liquids
Fundamentals of Laser Assisted Micro– and Nanotechnologies (FLAMN-16)
Saint-Petersburg, Russia, June 27th - July 1st, 2016
6. Strategies for the Scale-Up of Laser Ablation Synthesis of Colloids
4th Conference on Advanced Nanoparticle Generation and Excitation by Lasers in Liquids (ANGEL 16)
Essen, Germany, May 9th - 12th, 2016
5. High Power Ultrafast Laser Ablation in Liquids: Fundamentals and Applications
11th High Power Laser Ablation & Directed Energy Symposium (HPLA 2016)
Santa, Fe, NM, USA, April 4th - 7th, 2016
2015
4. Nanoparticle-Polymer Composites by Laser Ablation in Liquids
Textile Materials and Machinery Research Labs, Istanbul Technical University
Istanbul, Turkey, October 6th, 2015
3. Neue Konzepte für ultraschnelle Hochleistungslaserfertigung
NMWP Themenabend Materialien für die Photonik
Essen, Germany September 29th, 2015
2. Applications of laser-generated Nanomaterials
50th Zakopane School of Physics
Zakopane, Poland, May 18th -23th, 2015
1. Rapid Nanoparticle Polymer Composites Prototyping by Laser Ablation in Liquids
Technologie und Bionik, Hochschule Rhein-Waal
Kleve, Germany, February 3rd, 2015
